To: ICS Class Surveyor,
Technical Instructive and Procedures introduction (checking measuring equipment, safe work environment, of emergency occurrences, suspension, withdrawal and reinstatement of class and Garbage from ships).
Please be informed about the last Technical instructive and Procedures entering into force on 1 January 2021, download here.
1-PO02-P02 Procedure for checking measuring equipment (Version 1, 10-2020)
A-This Procedure is intended to provide the requirements for checking the conformity of measuring equipment used in the classification and statutory survey of the ship.
B-Documented Information revoked.
.1 P-CI-04(I)-Procedure for the control of monitoring and measuring equipment, Revision 1-06/2016.
2-PO02-P03 Procedure for a safe work environment (Version 1, 10-2020)
A-This Procedure is intended to provide the minimum requirements and recommendations to help keep Surveyors in a safe work environment, including the personal protection, when conducting surveys for classification and statutory certification of ships.
.1 Statement of Fact (2020-10)
C-Documented Information revoked.
.1 Statutory Notice No.100/2015-Recommendations for entering enclosed spaces aboard ships.
3-PO02-P07 Procedure for review and recording of emergency occurrences (Version 1, 11-2020)
A-This Procedure is intended to provide guidelines and requirements for ICS Class participation in investigations, records and studies of emergency occurrences with the aim to improve reliability of supervision items through enhancement of supervision methods, increasing the scope of supervision, making appropriate amendments and additions to the Rules and technical procedures, if necessary.
.1 Occasional Survey Report (Hull, Machinery, Electrical Equipment), (2013/02).
4-PO02-P08 Procedure for suspension, withdrawal and reinstatement of class (Version 1, 10-2020)
A-This Procedure is intended to provide guidelines and requirements for suspension, withdrawal and reinstatement of class to ships.
5-PO02-TI19 for Garbage from ships (Version 1, 10-2020)
A-The purpose of this Instructive is to provide guidelines and detailed Survey requirements to carry out the Statutory Certification of the ship in accordance with the provisions of Chapter 1 of Annex V of the MARPOL 73/78 Convention and IMO Resolution MEPC.295(71)-2017 Guidelines for the implementation of MARPOL Annex V, as amended, including the issuance of the corresponding Statement of Compliance for Garbage Pollution Prevention from Ships (SOC/GPP).
B- Applicable Forms.
.1 Survey Report/SOC/GPP (2020/10)-Survey Report for Statement of Compliance for Garbage Pollution Prevention from Ships.
.2 SOC/GPP-IC (2020/10)-Interim Statement of Compliance for Garbage Pollution Prevention from Ships.
.3 SOC/GPP-FT (2020/10)-Full-Term Statement of Compliance for Garbage Pollution Prevention from Ships.
If you have any comments or suggestions please don’t hesitate to contact us.
Ruben Salcedo| Engineer Surveyor
Tel. +507 322-0013 | firstname.lastname@example.org